1 PE15A1008 is a wideband low noise rf coaxial power amplifer operating in the 20 mhz to 3 ghz frequency range. the amplifer offers 1.6 db noise fgure, 13 dbm of p1db and 25 db small signal gain with the excellent gain fatness of 0.75 db max. this exceptional technical performance is achieved through the use of hybrid mic design and advanced gaas phemt devices. the low noise amplifer requires typically a +12v dc power supply. the connectorized sma module is unconditionally stable and includes built-in voltage regulation. this low noise amplifer requires only a single positive supply, is unconditionally stable and operates over the temperature range of -40c and +85c. features ? 20 mhz to 3 ghz frequency range ? p1db: 13 dbm ? flat small signal gain: 25 db ? gain flatness: 0.75 db ? output ip3: 23 dbm ? noise figure: 1.6 db ? reverse isolation: 50 db ? 50 ohm input and output matched ? -40 to 85c operating temperature ? unconditionally stable ? single dc positive supply ? built-in voltage regulator applications ? laboratory applications ? r&d labs ? military radio ? radar systems ? telecom infrastructure ? test instrumentation ? military & space ? communication systems ? wireless communication ? microwave radio systems ? cellular base stations ? low noise amplifer ? general purpose amplifcation ? general purpose wireless ? wideband gain block ? if amplifer/rf driver amplifer ? rf wideband front ends ? rf pre-amplifcation electrical specifcations (ta = +25c, dc voltage = 12volts, dc current = 75ma) description minimum typical maximum units frequency range 0.02 3 ghz small signal gain 22.5 25 27 db gain flatness 0.75 1 db gain variance at otr* 1.25 db output at 1 db compression point +12 +13 dbm output 3rd intercept point +20 +23 dbm noise figure 1.6 1.8 db input vswr 1.5:1 1.8:1 output vswr 1.5:1 1.8:1 reverse isolation 40 50 db spurious -60 dbc operating dc voltage 10 12 15 volts operating dc current 65 75 120 ma operating temperature range -40 +85 c click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: 23 dbm ip3, 1.6 db nf, 13 dbm, 20 mhz to 3 ghz, low noise amplifer, 25 db gain, sma PE15A1008 PE15A1008 PE15A1008 rev 1.0 23 dbm ip3, 1.6 db nf, 13 dbm, 20 mhz to 3 ghz, low noise amplifer, 25 db gain, sma technical data sheet
2 . . 5 p5 absolute maximum rating parameter rating units source voltage +15 volts rf input power +10 dbm operating temperature (base-plate) -55 to +125 c storage temperature -40 to +85 c . esd sensitive material, transport material in approved esd bags. handle only in approved esd workstation. compliance certifcations (visit www.pasternack.com for current document) rohs compliant plotted and other data notes: ? values at +25 c, sea level ? esd sensitive material, transport material in approved esd bags. handle only in approved esd workstation. PE15A1008 rev 1.0 click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: 23 dbm ip3, 1.6 db nf, 13 dbm, 20 mhz to 3 ghz, low noise amplifer, 25 db gain, sma PE15A1008 23 dbm ip3, 1.6 db nf, 13 dbm, 20 mhz to 3 ghz, low noise amplifer, 25 db gain, sma technical data sheet
3 power data db db -40 -30 -20 -10 0 10 20 30 freq.(mhz) gain, input return loss and output return loss gain(db) 25 c in_return loss(db) out_return loss(db) 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 70 170 270 370 470 570 670 770 870 970 1070 1170 1270 1370 1470 1570 1670 1770 1870 1970 freq.(mhz) noise figure noise figure PE15A1008 PE15A1008 rev 1.0 click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: 23 dbm ip3, 1.6 db nf, 13 dbm, 20 mhz to 3 ghz, low noise amplifer, 25 db gain, sma PE15A1008 23 dbm ip3, 1.6 db nf, 13 dbm, 20 mhz to 3 ghz, low noise amplifer, 25 db gain, sma technical data sheet
4 PE15A1008 23 dbm ip3, 1.6 db nf, 13 dbm, 20 mhz to 3 ghz, low noise amplifer, 25 db gain, sma PE15A1008 rev 1.0 23 dbm ip3, 1.6 db nf, 13 dbm, 20 mhz to 3 ghz, low noise amplifer, 25 db gain, sma from pasternack enterprises has same day shipment for domestic and international orders. our rf, microwave and millimeter wave products maintain a 99% availability and are part of the broadest selection in the industry . click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: 23 dbm ip3, 1.6 db nf, 13 dbm, 20 mhz to 3 ghz, low noise amplifer, 25 db gain, sma PE15A1008 url: http://www.pasternack.com/1.6-db-3-ghz-low-noise-amplifer-25-db-gain-sma-PE15A1008-p.aspx technical data sheet
5 ? 2014 pasternack enterprises all rights reserved PE15A1008 rev 1.0 23 dbm ip3, 1.6 db nf, 13 dbm, 20 mhz to 3 ghz, low noise amplifer, 25 db gain, sma PE15A1008 cad drawing
|
